Got accident

I got an accident when I was riding my bike lowracer. It isn't python.

A band for Right cuff slipped and the chain and chain wheel caught it, then I lost balance, I hit my left knee to concrete pillar for the electric line.
My knee plate was broken.



It's easy to lost balance with this bike, but it's also attractive point.
In this case, if I check my band for the cuff of the pants strictly, this accident can be avoided.

I think so. Any way, I have to take a rest for a while.

Recumbent Lowracer driving and stearing with Front wheel

This is first prot type recumbent lowracer of this type.

 The recutangular frame is used mainly. Because it's easy to weld them. almostly the jig doesn't be needed.
I designed this for DIY. I'm thinking to sell the technical drawing.
I blog my making stuff in this blog. They will become manual for DIY.

If you'd like to get completed frame, the frame will be made in the Prison.
The prisoner's welding skill is enough to make frame, I think.

Unfortunately, I don't like writing any things in japanese language. The language is heavy for my brain, Although it's my mother language.

Measurements:
Total Length:1970mm
Wheel base:
Ground clearance:
Seat height:
Width:
Needed insane length:

Total riding distance:


Some movies:

• Riding around the old Edo catsle 1
• Riding around the old Edo catsle 2
• Riding at first day
• Riding short down hill

Reinforcement

The seat of pink python isn't hard enough.
By attacking cushion, I can ride with more speed. But that means the power given pedaling is supported by the seat.



In the case of my white bike, I can't give more high power to pedals, because the stealing doesn't have the effection of centering front wheel like python lowracer and it's light for sharing. So the force of seat is enough. It doesn't have to support to the power of pedaling.

I think that the seat of my pink python needs reinforcement.



Up ward is bottom of the seat. I added four pipes for reinforcement.
Two of underside sorry to the power of pedaling. And then upper 2 ones work for reinforcing main frame. The main frame may not be able to support 1000kg. The forcement of carbon steel decreases the force to 35%. I heard that from high skilled man. The other bike maker said the thickness 1.2 mm is also available for my python's frame. The opinion is opposite. Now I don't feel and have any problems about main frame's hardness.

Shot from back side.



If it works, I can add more power to the pedal.

Making cushion for seat

I think some cushion is needed for recumbent lowercase to ride in the town.
So I made it.
At first, two Velcro strap were made.

Then, a piece of cloth was prepared to cover cushion.





The two Velcro belts were attached the cloth.


Next, a fastener were attached and sewed around.



I cut cushion and pushed in the cover. Then it was attached the seat.



Side view.




back side


Then, checked total balance.


From now, I go out by this bike and I check the cushion.

HandMade bicycle exhibition was over

Thank you for visiting my booth, and try my bike.

During the exhibition, I rode around the Royal place before opening the gate of exhibition. I took movies.
YouTube Channel: Loving wheels

You can see the movies. if you have not ridden there with lowracer, you can see the different view.

Next schedule... I got heavy tiredness by participating Exhitibion. I have lighter autism called Asperger's syndrome, PDD, 発達障害. I couldn't graduate from high school and I can't work in public, although I had tried do it for about 12 years.
At last I got second mental disorder. now I take abou 13 medecines a day. and I keep stay at home to keep my mental health and inteligence.
So, it takes one or two month to recover my condition, I think.

I have to think that people who is interested in my lowracer can try to ride it.
In my impression, In Tokyo, or near Tokyo is best.

The bike which I brought to the exhibition is 1st prottype. The distance for checking is only about 350km yet. I have not found redesigning part yet.
At least, total riding for 3000km, day riding 100km is needed to check the potencial and affect to the body, I think.

I have made python 4 python lowracers. Throught the making them and riding them, I could have experiments then get better measurements.
The 1st prottype which was brought to the exhibition was designed with such better measurements. Some problems which I got on python lowracer have been solved on the bike.

Anyway, I have to take a rest for recovering.
See you !
再見 !

Bike exhibition

At 24 and 25th in this month, I participate an bike exhibition in Tokyo.
I have to send my bike to the place of exhibition.
I tried to order cardboard boxes for that. Order made boxes are needed. But the cost is about 47$. I can't buy it, it's too expensive for me. So my mom asked near super market, then brought back some boxes. Their measurements don't fit to my bike.
I decided to make needed one.

At first, taking off brake wire.



Then two nuts are screwed off.

The bike is separated to the front and rear parts.

How is they packed ?

And

I decided that they are packed in one box.


I need making the cover for this box.